Products
Gas Traction Springs
Select from the images below a diameter to view product categories
In this range
4 types
Rod D1 Ø 8MM - Cylinder D2 Ø 23MM
0823-GT
View our high-quality Gas Traction Springs 8MM/23MM. Gas traction springs can be found in many applications to help lift, balance or lower objects.
Rod D1 Ø 10MM - Cylinder D2 Ø 28MM
1028-GT
View our high-quality Gas Traction Springs 10MM/28MM. Gas traction springs can be found in many applications to help lift, balance or lower objects.
Rod D1 Ø 10MM - Cylinder D2 Ø 28MM with damping
1028-GTD
View our high-quality Gas Traction Springs 10MM/28MM with damping. Gas traction springs can be found in many applications to help lift, balance or lower objects.
Rod D1 Ø 14MM - Cylinder D2 Ø 40MM
1440-GT
Gas Traction Springs 14MM/40MM. Gas traction springs can be found in many applications to help lifting, balancing or lowering objects without using external air or hydraulic equipment.
About Gas Traction Springs
Gas traction springs can be found in many applications to help lifting, balancing or lowering objects without using external air or hydraulic equipment.
A gas spring consists of multiple seals, rod, piston and a cylinder filled with Nitrogen and a small amount of oil for lubrication. In many ways they work the same as a compression springs with the only difference that the rod is retracted in its start force ( F1) position.
Gemini Gas Springs™ are maintenance free and ready for use and can be mounted in any direction.
Lifetime expectation of a traction spring depends on stroke length, force and number of cycles. On average the expected lifetime will be approx. 2,000 meter/6,561 ft.
Gemini Gas Traction Springs™ are available in diameters 8/23MM, 10/28MM and 14/40MM Stroke length 10MM/0.39” up to 600MM/23.62” Force range 50N/11.25Lbs to 4000N/900Lbs depending on diameter and or type. Temperature range -35°C/-31°F to 90°C/194°F, -45°C/-49°F or +200°C/+392°F
Request a quote for Gas Traction Springs
Every Gemini gas spring is built to order in Vernon, BC. Send us your stroke, force and end-fitting requirements and we will come back with a quotation.